- Tavsiye Et
- Sık Kullanılanlara Ekle
- Ziyaretçi Defteri
- İletişim Formu
- Hakkımızda / About Us
- Hızlı Arama
- PC Sihirbazı
- Gamer's Zone
- Üye Servisleri
- Sepetim (0 ürün)
- Noctua NT-H1 Termal Macun
- Diğer NOCTUA Ürünleri
- Stoklarda Yok
- Ürünün Fiyatı :11,00 EUR + KDV%7 İndirim Havale İle 35,73 TL
- %6 İndirimli10,34 EUR + KDVAsyaCard 9, Axess 6, Bonus 3 Taksit ve Karta Tek Ödeme İle36,12 TL%4 İndirimli 10,56 EUR + KDVMaximum 6, Bonus 5, VakıfWorld 9, Finans 6 Taksit ve PayPal ile36,88 TL%3 İndirimli10,67 EUR + KDVBonus, Maximum, World ve Axess 9 Taksit İle37,27 TL
NOCTUA NT-H1 Thermal Macun
Yüksek performanslı Thermal Macun!
Volume 1.4ml / 3.5Gr (15 Kullanım)
Specific Gravity 2,49 g/cm³
Recommended storage time (before use) up to 2 years
Recommended usage time (on the CPU) up to 3 years
Peak operating temperature -50°C to +110°C
Recommended operating temperature -40°C to +90°C
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!
Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.
Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.
Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.