Fırsatı Yakala
  • Hoşgeldiniz | Giriş Yapılmadı
  • Giriş Yap
  • Üye servislerinden yararlanmak ve sipariş vermek için üye olmalısınız. Üye olmak için tıklayınız.
  • Noctua NT-H1 Termal Macun
  • Stoklarda Var, SÜPER HIZLI GÖNDERİ
    Bu ürün saat 17:30'a kadar verdiğiniz siparişlerde aynı gün kargoya verilir.
  • Ürünün Fiyatı :11,00 EUR + KDV
    %7 İndirim Havale İle 34,77 TL
  • %6 İndirimli10,34 EUR + KDV
    Axess 9, Maximum 9, V.World 9, Bonus 3 Taksit, ve Karta Tek Ödeme İle35,14 TL
    %4 İndirimli 10,56 EUR + KDV
    Maximum 9, Paraf 9, AsyaCard 9, Bonus 5 Taksit ve PayPal ile35,89 TL
    %3 İndirimli10,67 EUR + KDV
    World 9, AsyaCard 9, Bonus 7 ve Finans 6 Taksit İle36,26 TL

NOCTUA NT-H1 Thermal Macun 

Yüksek performanslı Thermal Macun!

Volume  1.4ml / 3.5Gr (15 Kullanım) 
Specific Gravity  2,49 g/cm³
Colour  grey 
Recommended storage time (before use)  up to 2 years
Recommended usage time (on the CPU)  up to 3 years 
Peak operating temperature  -50°C to +110°C  
Recommended operating temperature  -40°C to +90°C 

Excellent performance
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
 
Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!
 
Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.
 
Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
 
Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.
 
Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.